 |
‘CY-RAM2000 parallel-cables current balance detector’ is designed for easy installation in a small space without removing the main bus or cable. It consists of two parts: flexible rogowski coil probe and electronic modules with a display.The instrument can simultaneously display two wires AC current, and also shows the current difference & current unbalanced degree between two wires. Mainly used for various power bus current measurement, and two current balance detection.
Features：
Flexible,lightweight, beautiful appearance
Simple and quick installation in small space
without high voltage in secondary open circuit
No iron core saturation and damage when overload
Excellent linearity
Multi-size optional
Application：
General measurement and protection for strong mobility or space-constrained or uninterrupted power systems
Power instrumentation, electronic multi-function energy meter and field calibrator, instrumentation measurement and protection
E.g.
parallel-cables bus current balance detection
Three-phase load current balance detection of power system;
Current detection of large load power system lines.
Technical data：
|
Model |
CY-RAM2000 |
|
Current range |
2000A |
|
Accuracy |
±1%(5%~120%In) @45-65Hz |
|
Linearity |
±0.3% (5%~120%In) |
|
Position sensitivity |
±2% |
|
External influence |
±1% range (distance to coil >200mm) |
|
Temperature coefficient |
± 0.08 % /℃ of the reading data |
|
Frequency range |
10 Hz to 20 kHz (-3dB) |
|
Power supply |
4*AA| MN1500|LR6 battery (external adapter 9~12V DC) |
|
Overload indication |
过载超量程120%时指示（显示Alarm） Indicate when overload over 120%, (display Alarm) |
|
Automatic shutdown time |
15 min@ No current acquisition signal |
|
Operating Voltage |
600 V AC RMS |
|
Cable length |
2 meters,（measuring probe to the electronics module） |
|
Weight |
250 g（measuring probe ），160 g（ electronics module） |
Dimension and Schematic： Unit：mm
Component name
①flexible rogowski coil A
②flexible rogowski coil B
③current measuring input terminal A
④current measuring input terminal B
⑥B/L button, Backlight switch
⑦Hold button (debug button)
⑧Power button
⑨Battery compartment rear cover
Button function：
⑧Power button: switch key, long press more than 3 seconds turn on/off;
⑦Hold button : data hold key, short press to keep the current data, press again to return to normal;
⑥B/L button: short press to turn on or off the LCD backlight, long press debug two channels for the same value.
Usage instruction：
Attention:
1. To achieve best accuracy, flexible rogowski coil measurement probe should keep consistent with A, B channel when connection.
2. When the display shows low power, display dim, can not boot, you should replace the battery.
3 When the display is not normal (e.g. only two lines are displayed), remove the battery and reload it.
1# International Business Department.
0086-755-8600 0713
Mobile :+86-138 2379 0397
1F and 4F block B,Jiada R&D Bldg, High-tech Park,Nanshan,Shenzhen,China
Post code：518057
Shenzhen Chuangyin Co., Ltd.---- a national high-tech enterprise. 
Chuangyin Activities 
Smart Distribution Solution 
welcome to join us 
Welcome to call the hotline : 0755-86000713 