分享到:
产品系列
你现在的位置:产品系列>电缆附件>IEC电缆插拔头>630A系列
Test Rod

Test Rod

Product Description:

The test rod shall be suitable to be used with all the T connector systems, allow cable testing using a test rod without disconnecting the T connector from the bushing

The test rod is mounted on to the threaded pin (clamping screw) clamping screw in the type C interface tee and rear connectors. The test cable is connected to the threaded stem and the insulating shroud moved to its final position over the end of the test rod.

The test rod can be used for:

- cable fault location

- cable testing

- phasing checks, etc.

Comply with EN50180-50181 interface C design.

产品描述


Technical Requirements

Environmental conditions

The straight connector system is suitable for indoor installation under environmental conditions:

l  Severe atmospheric and industrial air pollution, coal dust, sea salt

l  High atmospheric humidity as experienced in coastal or desert areas

l  Annual variation in air temperature: -10℃to +55℃

l  Annual mean air temperature: +25℃

l  Maximum relative humidity: 90%

l  Average relative humidity: 70%

l  Average ambient temperature measured over a period of 24 hours does not exceed: +35℃

l  Maximum difference of ambient temperature from day to night: +25℃

l  Altitude: up to 1000m



Item

Parameter

Rated system voltage

33kV

The maximum operating voltage, Um

36 kV

Rated frequency

50Hz

Power frequency withstand voltage (AC) 5min

81kV

Withstand voltage (DC) 15min

72kV

Insulation level of equipment: basic

insulation level BIL (1.2/50μsec)

170 kV peak

Standard

IS 1516-4

(equivalent to IEC 60502-4)

HD 629.1

EN 50181


联系我们
电话: 0086-755-86000443
传真: 0086-755-86000614


地址:深圳市南山区松坪山路5号嘉达研发大楼 (深圳)

珠海市香洲区金鼎科技五路创银科技园  (珠海)

江西省九江县沙城工业园创银科技园    (江西)


Copyright © 2019. 深圳市创银科技股份有限公司.All rights reserved. 粤ICP备11018302号